Acer h9500 bd User Manual

English

Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions

are not supported under HDMI, DVI or Video mode.

Note: "HDMI Scan Info" function is only supported under HDMI mode.

Note: "Depth" and "Convergence" are only supported under User mode.

Note: "3D Format" is not supported under Computer or Video mode.

Note: It needs correct settings on graphic card 3D application program for

correct 3D display.

V. Position

(Vertical position)

•

Press

to move the image down.

•

Press

to move the image up.

Frequency

"Frequency" changes the projector's refresh rate to match the

frequency of your computer’s graphics card. If you can see a vertical

flickering bar in the projected image, use this function to make the

necessary adjustments.

Tracking

Synchronizes the signal timing of the projector with the graphics card.

If you experience an unstable or flickering image, use this function to

correct it.

HDMI Scan Info

Adjust the overscan ratio of the HDMI image on screen.

•

Auto: Automatically adjust by information from player.

•

Underscan: Always no overscan on HDMI image.

•

Overscan: Always keep overscan on HDMI image.

2D to 3D

Support most of the 2D contents.

Choose "On" to enable 2D to 3D function supported by DLP 3D

technology. Please use DLP 3D glasses to have correct performance.
Mode

Choose mode of "Photo", "Movie", "Jump-Out" and "User" as your

prefered 3D setting.
Convergence

Choose convergrence effect of "Inward", "Middle" and "Outword" as

your preferred 3D setting in "User" mode.
Depth

Choose depth effect of "Low", "Middle" and "Strong" as your

prefered 3D setting in "User" mode.

Choose "On" to enable DLP 3D function.

•

On: Choose this item while using DLP 3D glasses, quad buffer
(NVIDIA/ATI...) graphic card and HQFS format file or DVD with

corresponding SW player.

•

Off: Turn off 3D mode.

3D Format

Adjust the 3D format to display 3D content correctly.

3D Sync Invert

If you see a discrete or overlapping image while wearing DLP 3D

glasses, you may need to execute "Invert" to get best match of left/

right image sequence to get the correct image (for DLP 3D).

3D Warning

Message

Choose "Yes" to display the 3D warning message.