Apple appleshare ip 6.0 Quick Setup Guide
Installing AppleShare IP 6.0
25
6
Click the “Restart automatically after a power failure” checkbox so that a checkmark appears.
7
Click the “Never put the hard disk to sleep” checkbox so that a checkmark appears.
8
Click OK.
9
Close the Energy Saver control panel.
Your changes are saved and take effect immediately.
Verifying the Computer’s Date, Time, and Time Zone
Since the computer’s internal date and time settings are the source for all date and time
entries in your AppleShare IP server records, you need to verify that the date, time, and time
zone are correct in the Date & Time control panel.
entries in your AppleShare IP server records, you need to verify that the date, time, and time
zone are correct in the Date & Time control panel.
1
Open the Date & Time control panel.
2
Click the Set Time Zone button.
The city list appears.
3
Choose the city that is closest to where you are located and in the same time zone. Then
click OK.
click OK.
4
Make sure your computer’s date, time, and daylight savings time settings are correct for your
location.
location.
5
Close the Date & Time control panel.
Installing AppleShare IP 6.0 Software
You can install the AppleShare IP 6.0 software using either the Easy Install or the Custom
Install procedure, as described in the following sections.
Install procedure, as described in the following sections.
If you plan to run all of the AppleShare IP servers on the same computer, Easy Install is the
most convenient installation procedure.
most convenient installation procedure.