Apple powermac g3 blue.white Service Manual
Take Apart
Processor Module - 63
8 Install the jumper as
shown. Be sure to cover
the pins as shown and to
install the jumper block
with the gold connector
pins facing toward the
board.
Replacement Note:
Position
the processor module over
the slot, seat it evenly, and
press down gently on the
module to install it. Never
use force or you may damage
the connector pins on the
underside. Flip down the
lever to secure the module.
Processor
Jumper
Block
300 MHz
Black
350 MHz
Blue
400 MHz
White
300 MHz
Black
350 MHz
Blue
400 MHz
White
450 MHz
Yellow