Access virus os4 User Manual
198
CHAPTER
20
The keyboard versions of the Virus
The internal + external key-
board zone
board zone
PartEnable =Off
KeybToMidi =On:
The keyboard sends its signals to
the sound generator and to MIDI-
Out. In a single keyboard zone you
can combine a Virus part and an
external sound generator on the
same MIDI channel.
KeybToMidi =On:
The keyboard sends its signals to
the sound generator and to MIDI-
Out. In a single keyboard zone you
can combine a Virus part and an
external sound generator on the
same MIDI channel.
Since PartEnable does not work on
the receiving side when in Multi-
Channels mode, the parts play the
notes coming through MIDI-In on
the corresponding MIDI channels!
If this should create problems in
your MIDI-Setup, it might be nec-
essary to set different MIDI chan-
nels for transmitting and receiving
on each machine. Alternatively a
part can be “deactivated” if the
LowKey and HighKey parameters
are set to C-2. It would only
respond to the lowest MIDI note C-
2, which is rarely used in everyday
situations.
the receiving side when in Multi-
Channels mode, the parts play the
notes coming through MIDI-In on
the corresponding MIDI channels!
If this should create problems in
your MIDI-Setup, it might be nec-
essary to set different MIDI chan-
nels for transmitting and receiving
on each machine. Alternatively a
part can be “deactivated” if the
LowKey and HighKey parameters
are set to C-2. It would only
respond to the lowest MIDI note C-
2, which is rarely used in everyday
situations.
Please remember that the KeybTo-
Midi parameter is only visible if the
KEYBOARD Mode is set to Multi-
Channels.
Midi parameter is only visible if the
KEYBOARD Mode is set to Multi-
Channels.
Please notice the following: When
set to OneChannel, playing the
keys has the effect that the key-
board and the panel operate the
selected part. The Part-Select
when MultiChannels is set is valid
only for the panel, not for the key-
board.
set to OneChannel, playing the
keys has the effect that the key-
board and the panel operate the
selected part. The Part-Select
when MultiChannels is set is valid
only for the panel, not for the key-
board.