abit siluro fx5900 dt Manual
Hardware Setup
2-1
Chapter 2. Hardware Setup
2-1. Card
Installation
This graphics card can only be installed in a motherboard with AGP slot. Please
handle this card with care and make sure to unplug the power supply of your system
before installation.
handle this card with care and make sure to unplug the power supply of your system
before installation.
New Systems:
1.
2.
3.
4.
5.
6.
7.
Unplug all power cords of your computer.
Remove computer chassis cover.
Locate the AGP slot on your
motherboard.
motherboard.
Remove the metal bracket
corresponding to the AGP slot.
Keep the screw.
corresponding to the AGP slot.
Keep the screw.
Align this card to the AGP slot.
Hold the card’s edges and insert
it into the slot without using
excessive force or pressing any
components on the card. Make
sure it is firmly and completely
fixed into the slot.
Hold the card’s edges and insert
it into the slot without using
excessive force or pressing any
components on the card. Make
sure it is firmly and completely
fixed into the slot.
Secure this card’s mounting
bracket to the back panel of
computer chassis with the screw
removed from the metal bracket.
bracket to the back panel of
computer chassis with the screw
removed from the metal bracket.
Replace the chassis cover.
Systems with Existing VGA Card:
1.
2.
3.
Change the display driver to Standard VGA.
Shut down your computer and unplug all power cords.
Replace the existing VGA card with this new card.
Your graphics card is now installed. Before restarting your computer, connect PC
monitor or other display devices to this card (see “Devices Connection”).
monitor or other display devices to this card (see “Devices Connection”).
User’s Manual