Acronis true image echo Manual

 

43                                                                                 Copyright © Acronis, Inc., 2000-2009 
 

As mentioned above (see 

), Acronis True 

Image Echo Server can be run in several ways. We recommend that you first try to 
restore data running Acronis True Image Echo Server under Windows because this 
method provides more functionality. Boot from the bootable media or use the Startup 
Recovery Manager (see 

 only if Windows does not 

load. 
The boot CD from which you loaded the program does not keep you from using other CDs 
with backups. Acronis True Image Echo Server is loaded entirely into  RAM,  so  you  can 
remove the bootable CD to insert the archive disk. 

 

Be careful! Disk letters in standalone Acronis True Image Echo Server might sometimes 

differ from the way Windows identifies drives.  For example, the D: drive identified in the 

standalone Acronis True Image Echo Server might correspond to the E: drive in Windows. 

 

If a backup image is located on bootable media, you might have a choice of using Acronis 

One-Click Restore. This operation always restores the entire physical disk. Therefore, if 

your disk consists of several partitions, the partitions that are missing from the image will 

be lost. Please make sure that the image contains all disk partitions or you do not need 

the partitions that are not imaged before using Acronis One-Click Restore. For more 
information on Acronis One-Click Restore, see 

. 

When booted from removable media, RIS server or by Startup Recovery Manager, Acronis 
True Image Echo Server may not detect the network. This can occur if there is no DHCP 
server in your network or if your computer address was not identified automatically for 
some reason.  
To enable a network connection, specify network settings manually in the window 
available at Tools -> Options -> Network adapters.