Acomdata m-2163-v1e User Manual

Page of 53
–  46  –
Glossary
Bit - The smallest unit of digital data. In binary code, a bit is repre-
sented logically as a either a 1 or a 0.
Buffer – RAM cache that temporarily stores data so it can be deliv-
ered to a device as it is needed.
Bus – An electronic link that can transmit data between digital 
devices, such as computers and computer peripherals.
Byte – A unit of digital data, usually made up of eight bits.
Capacity – The amount of data that can be stored on a hard drive 
or other storage device.
Daisy chain – A hardware configuration in which peripheral devic-
es are connected to each other in a series. The FireWire interface, 
for example, supports a daisy chain of up to 62 drives.
Data Transfer Rate – The speed at which data transfers to and 
from the drive.
Device Driver – A software program that enables a computer to 
communicate with peripheral devices, such as hard drives and 
CD-ROM drives. Each type of device requires a different driver.
External Hard Drive – A external peripheral device containing a 
hard drive mechanism connected to a computer via a data com-
munication interface.
FAT32 – A file system that organizes files on a disk. This file system 
is standard for Windows 98SE and Me, and is supported under 
Windows 2000 and XP. A single file is limited in size to 4 GB.
Format – Sets up a file system for storing and retrieving files on a 
disk. Referred to as initialization on Mac.
Gigabyte – 1,024 megabytes (binary); 1,000 megabytes (decimal), 
or approximately one billion bytes. 
Hard Drive – An electromechanical device used for information 
storage and retrieval, incorporating one or more rotating disks 
(platters) on which data is recorded, stored, and read magnetically.
Hardware – Physical components of a computer system.
Hot-Pluggable – The ability to connect and disconnect external