Acomdata m-hdxxxse5-72-pci-v1e User Manual
– 30 –
Horizontal Placement
Do not discard the stand. Your Drive’s Model and Serial
numbers are printed on the label affixed to the underside
of the stand. In the event that you need warranty service,
you will need to send us the stand along with the Drive.
numbers are printed on the label affixed to the underside
of the stand. In the event that you need warranty service,
you will need to send us the stand along with the Drive.
Removing the stand
Use a screw driver with the proper type and size head
to loosen the two screws located on the underside of
the stand. Loosen the screws just enough so that you
can easily slide the stand out of the groove. Keep the
nuts attached to the screws. Do not discard the stand.
to loosen the two screws located on the underside of
the stand. Loosen the screws just enough so that you
can easily slide the stand out of the groove. Keep the
nuts attached to the screws. Do not discard the stand.
Affixing the rubber feet
to the Drive case
to the Drive case
It is highly recommended you
use the supplied rubber feet
for horizontal placement
and stacking of Drives.
The feet help keep the
Drive securely in place,
and they also prevent
the Drive case from
possibly scuffing your
desktop.
use the supplied rubber feet
for horizontal placement
and stacking of Drives.
The feet help keep the
Drive securely in place,
and they also prevent
the Drive case from
possibly scuffing your
desktop.
1. Decide wether you want the Power-Data Light to be
located on the left or right side when the Drive is in