ACR Electronics rcl-600 searchlight User Manual
Y1-03-0139 Rev. C
3
3.0
INSTALLATION AND OPERATION INSTRUCTIONS
3.1 Wiring
of
Unit
The RCL-600A Remote Control Searchlight consists of Searchlight Unit and
Master Remote Control Panel. The user must supply the cable and/or wire to
power the unit. The source must be a fused 24 VDC, 10 Amp supply. This cable
is to be attached to the Searchlight as shown in the connection diagram, Figure
1. Observe polarities when attaching wires!
Master Remote Control Panel. The user must supply the cable and/or wire to
power the unit. The source must be a fused 24 VDC, 10 Amp supply. This cable
is to be attached to the Searchlight as shown in the connection diagram, Figure
1. Observe polarities when attaching wires!
FIGURE 1