Acronis os selector 8.0 User Manual
4. Choose the target free space.
5. Choose the parameters of the new partition in the dialog box.
The dialog box for choosing the partition parameters has the same look and
functionality as the one that appears during partition creation. Please note
that it is impossible to change the file system (only the FAT16ÙFAT32
conversion is possible), and that cluster size can be changed only for
FAT16/FAT32.
functionality as the one that appears during partition creation. Please note
that it is impossible to change the file system (only the FAT16ÙFAT32
conversion is possible), and that cluster size can be changed only for
FAT16/FAT32.
When moving a partition on the «Other» sheet, it is possible to set the mode
when file system adjustment is not performed («Disable fitting» checkbox).
Parameters are adjusted when the data areas of the source and destination
partitions overlap. In this case no unnecessary data copying is done, but the
parameters of the resulting partition may become non-standard.
when file system adjustment is not performed («Disable fitting» checkbox).
Parameters are adjusted when the data areas of the source and destination
partitions overlap. In this case no unnecessary data copying is done, but the
parameters of the resulting partition may become non-standard.
6.
Confirm the operation by pressing the Enter key or clicking the OK
button in the lower part of the dialog box.
button in the lower part of the dialog box.
The creation, copying, moving and resizing partition functions of the Disk
Administrator are fully universalized. It is possible to move a partition, resize it, and
change the cluster size, label and file system type all in one pass. For example it is
possible to copy a partition to a free space of smaller size, a task impossible for any
other similar software!
Copyright © SWsoft, 2000-2002
73