Acumen basix es User Manual

8

9

1. From Time Mode press
   and hold the MODE/SET
   button to enter the Time
   Setting Mode.

2. Hour (blinking)
 - set by using the RESET
   button.
 - Press the MODE/SET
   button to proceed to the
   next item.

3. Minutes (blinking)
 - set by using the RESET
   button.
 - Press the MODE/SET
   button to proceed to the
   next item.

4. 12/24hr. Time display
    (blinking)
 - set by using the RESET
   button.
 - Press the MODE/SET
   button to proceed to the
   next item.

5. Daily alarm (blinking)
 - set ON or OFF with the
   RESET button.
 - Press the MODE/SET
   button to proceed to the
   next item.

6. Alarm hour (blinking)
 - set by using the RESET
   button.
 - Press the MODE/SET
   button to proceed to the
   next item.

Heart Rate  - From Time mode click MODE/SET
button once to go to Heart Rate mode and
begin your exercise.

If your transmitter is correctly attached, the
running man indicator on the watch display
should begin to blink and your current heart
rate in beats per minute will come up on the
display.

If no heart rate is detected for 5 minutes, the
heart rate circuit will switch itself off. The “   ”
indicator tells if the heart rate circuit is on. To
switch it back on after it has shut off, simply
restart the Heart Rate mode by clicking the
MODE/SET button.

7. Alarm minutes
    (blinking)
 - set by using the RESET
   button.
 - Press the MODE/SET
   button to proceed to the
   next item.

8. Smart Lite (Blinking)
 - set ON or OFF with the
   RESET button.
   This feature activates the
   night light between 6AM
   & 6 PM with any button
   pressed. Setting it off will
   conserve the battery life.
 - Press the MODE/SET
   button to exit the setting
   mode.

Cycle