Alcatel-Lucent omnistack 6124 User Manual
Management Setup Menu
2-15
Assigning SNMP Parameters
Use the SNMP Configuration screen to display and modify parameters for the
Simple Network Management Protocol (SNMP). The switch includes an on-board
SNMP agent which monitors the status of its hardware, as well as the traffic passing
through its ports. A computer attached to the network, called a Network
Management Station (NMS), can be used to access this information. Access rights
to the on-board agent are controlled by community strings. To communicate with the
switch, the NMS must first submit a valid community string for authentication. The
options for configuring community strings and related trap functions are described in
the following sections.
Simple Network Management Protocol (SNMP). The switch includes an on-board
SNMP agent which monitors the status of its hardware, as well as the traffic passing
through its ports. A computer attached to the network, called a Network
Management Station (NMS), can be used to access this information. Access rights
to the on-board agent are controlled by community strings. To communicate with the
switch, the NMS must first submit a valid community string for authentication. The
options for configuring community strings and related trap functions are described in
the following sections.
Alcatel OmniStack 6124
< SNMP Configuration >
Send Authentication Fail Traps : ENABLED
SNMP Security
IP Trap Managers
<Apply>
<Ok>
<Cancel>
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter
Description
Send Authentication Fail Traps Issue a trap message to specified IP trap managers whenever authentication
of an SNMP request fails. (The default is disabled.)
SNMP Communities
Assigns SNMP access based on specified strings.
IP Trap Managers
Specifies management stations that will receive authentication failure
messages or other trap messages from the switch.