Manualsbrain.com
  1. Manuals
  2. Brands
  3. Alcatel-Lucent
  4. omniaccess safeguard controller
  5. User Manual

Alcatel-Lucent omniaccess safeguard controller User Manual

Download
Page of 1
Network Core
Status LEDs
Quick Start Guide 
|
 
OmniAccess SafeGuard Family
Front
Back
6. Login
Username:admin
Password: <enter>
7. Enter Device Configuration Mode
(SafeGuardOS) >enable
(SafeGuardOS) #configure terminal
8. Set Up Out-of-Band Management Port IP Addressing
(SafeGuardOS) (Config)#serviceport ip <ipaddr> <netmask> <gateway>
9. Set Device Time and Date
Set the correct time zone, one per line. The example below displays a sample 
session.
(SafeGuardOS) (Config)#clock timezone PST -8
(SafeGuardOS) (Config)#exit
10. Configure the Network Time Protocol
To set the on-board real-time clock, first enter the ‘clock’ command to set the 
time and date. The example below displays a sample session.
(SafeGuardOS) #clock set 10:05:00 Nov 1 2005
(SafeGuardOS) #configure terminal
(SafeGuardOS) (Config)#sntp client mode unicast
(SafeGuardOS) (Config)#sntp server <sntp-server-ipaddr>
11. Set Up Simple Network Management Protocol (SNMP) 
Enter the OmniAccess SafeGuard system name. The example below displays 
a sample session.
(SafeGuardOS) (Config)#snmp-server sysinfo name <name>
This command sets the physical location of the OmniAccess SafeGuard. The 
range for name, location and contact is 1 to 31 alphanumeric characters. The 
OmniAccess SafeGuard management application uses a format of 
“region_building” for device location addressing. The example below 
displays a sample session.
(SafeGuardOS) (Config)#snmp-server sysinfo location <location>
The SNMP read-only community string allows access to the OmniAccess 
SafeGuard statistics. The SNMP Read-only community string enables a 
remote device to retrieve information from a device. To restrict the access to 
the OmniAccess SafeGuard device information, enter the name for the 
SNMP read-only community. The example below displays a sample session.
(SafeGuardOS) (Config)#snmp-server community public
The SNMP read-write community string allows a remote device to read 
information from a device and to modify settings on that device. Enter the 
name for the SNMP read-write community. The example below displays a 
sample session.
(SafeGuardOS) (Config)#snmp-server community private
(SafeGuardOS) (Config)#snmp-server community rw private
12. Set Up an Admin User Password
Enter the OmniAccess SafeGuard password.
(SafeGuardOS) (Config)#aaa mgmt-user passwd admin <password>
(SafeGuardOS) (Config)#exit
13. Save Configuration
(SafeGuardOS) #write memory
Are you sure you want to save? (y/n) y
5. Connect a Terminal/PC or Notebook PC to the Serial 
Com Port
4. Power Options
We supply country-specific power cords.
2a. Included are rubber feet if the box will be placed on a shelf or table.
2b. Included are mounting ears with their hardware. Please note: rack mount 
screws are not included.
Reset
Extensibility Ports used for High 
Availability and Monitoring
Flash
Power
Management
Ethernet Port
Host/Access
COM PORT 
SETTING
Emulation Type (PC or Laptop) 
vt100
Bits Per Second 
9600
Data Bits 
8
Parity Bits 
None
Stop Bits 
1
Flow Control 
None 
The terminal or PC displays the login prompt.
Port Pair
P/N: 005-0023
*005-0023*
Rev. A1
*A1*
Serial Number
0000FCS000
Main Site
http://www.alcatel-lucent.com/wps/portal/enterprise
Support Site
http://www1.alcatel-lucent.com/enterprise/en/support/index.html
Email
support@ind.alcatel.com
1.
 
Thank you for your purchase of Alcatel-Lucent Products and Services.
Alcatel-Lucent Customer Support Information
Sales & Support Contact Center Telephone
North America 1-800-995-2696
Latin America 1-877-919-9526
Europe +33 (0) 38 85 56 92 9
Asia Pacific +65 6586 1555
Worldwide 1-818-878-4507
2. Mounting Options
3. SFP Installation
SFPs are Inserted into OmniAccess SafeGuard Family box
Core Switch
IDS/IPS
Firewall
Internet
`
`
`
Access Switch
A/D Server
RADIUS