Alcatel-Lucent omnistack 6148 User Manual
Using the System Configuration Program
2-38
Configuring Broadcast Storm Control
Use the Broadcast Storm Control Configuration screen to enable broadcast storm
control for any port on the switch, as shown below.
control for any port on the switch, as shown below.
Alcatel OmniStack 6148
< Broadcast Storm Control Configuration > Unit 1 Port
1 - 12
Broadcast control on all ports :
[Enable]
[Disable]
Port
Threshold
Broadcast Control
-------------------------------------------------------
1
500
ENABLED
2
500
ENABLED
3
500
ENABLED
4
500
ENABLED
5
500
ENABLED
6
500
ENABLED
7
500
ENABLED
8
500
ENABLED
9
500
ENABLED
10
500
ENABLED
11
500
ENABLED
12
500
ENABLED
<Apply> <Ok> <Cancel>
<Up Unit>
<Down Unit> <Prev Page> <Next Page>
Use <TAB> or arrow keys to move. <Enter> to select
Parameter
Description
Broadcast control on all ports Allows you to enable/disable broadcast storm control for all ports on the switch.
Select [Enable] and press <Enter> to enable broadcast control for all ports.
Select [Disable] and press <Enter> to disable broadcast control for all ports.
Threshold
The packet-per-second threshold for broadcast packets on the port.
(Default is 500 pps.)
Broadcast Control
Enables/disables broadcast control for the port. When enabled, the switch will
employ a broadcast-control mechanism if the packet-per-second threshold is
exceeded. This mechanism limits the amount of broadcasts passed by the port
to half of the received packet-per-second count. The control mechanism
remains in effect until the number of received broadcasts falls back below the
packet-per-second threshold. (Default is Enabled.)