Alcatel-Lucent speedtouch 500 User Manual
326
PPPoE Commands
EXAMPLE:
RELATED COMMANDS:
srcmsk
The source IP mask.
Depending on the source netmask:
Depending on the source netmask:
•
Everybody is allowed to use this PPPoE connection (dstmsk=0)
•
Only members of the same subnet as the host which opened the
PPPoE connection are allowed to use the PPPoE connection
(dstmsk=1)
PPPoE connection are allowed to use the PPPoE connection
(dstmsk=1)
•
The actual destination mask will be the netmask applicable for the IP
address of the host which opened the PPPoE connection.
address of the host which opened the PPPoE connection.
•
Only the host which opened the PPPoE connection is allowed to use
the PPPoE connection. (dstmsk=32)
the PPPoE connection. (dstmsk=32)
•
Any valid (contiguous) netmask in case of VLSM.
OPTIONAL
metric
The route metric, i.e. the cost factor of the route.
Practically, the cost is determined by the hop count.
Practically, the cost is determined by the hop count.
OPTIONAL
=>pppoe iflist
PPPoE1: dest : PVC3
PPPoE1: dest : PVC3
Retry: 10
QoS
default
encaps
LLC
mode = IP Routing
flags = echo
flags = echo
magic
accomp
restart
mru
addr
route
savepwd
PPPoE
trans addr = pat
mru = 1492
user name = guest
password = ********
admin state = down
oper state = down
link state = not-connected
LCP : state = initial
retransm = 10
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
=>pppoe rtadd intf=PPPoE1 dst=172.16.0.5 dstmsk=24 src=10.0.0.2 srcmask=24
=>pppoe iflist
PPPoE1: dest : PVC3
=>pppoe iflist
PPPoE1: dest : PVC3
Retry: 10
QoS
default
encaps
LLC
mode = IP Routing
flags = echo
flags = echo
magic
accomp
restart
mru
addr
route
savepwd
PPPoE
trans addr = pat
mru = 1492
route = 10.0.0.2/24 - 172.16.0.5/24 (metric 1)
user name = guest
user name = guest
password = ********
admin state = down
oper state = down
link state = not-connected
LCP : state = initial
retransm = 10
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
=>
Delete the route specification for an upcoming PPPoE link.