Alcatel-Lucent omniaccess 6000 User Manual

Part 031639-00

May 2005

—Dangerous voltage in excess of 240VAC is always present 

while the Alcatel Power Supply Module is plugged into an electrical 
outlet. Remove all rings, jewelry, and other potentially conductive 
material before working with this product.

Never insert foreign objects into the chassis, the power supply, or any 
other component, even when the power supplies have been turned 
off, unplugged, or removed.

Main power is fully disconnected from the Alcatel Wireless LAN 
Switch by unplugging all installed power supplies’ power cords from 
their power outlets. For safety reasons, verify the power outlets and 
plugs are within easy reach of the operator.

Do not handle electrical cables which are not insulated. This includes 
any network cables.

To minimize electrical hazard, keep water and other fluids away from 
the product.

Comply with electrical grounding standards during all phases of 
installation and operation of the product. Do not allow the Alcatel 
Wireless LAN Switch chassis, network ports, power supplies, or 
mounting brackets to contact any device, cable, object, or person 
attached to a different electrical ground. Also, never connect the 
device to external storm grounding sources.

Installation or removal of the chassis or any module must be 
performed in a static-free environment. The proper use of anti-static 
body straps and mats is strongly recommended.

Modules must be kept in anti-static packaging when not installed in 
the chassis.

Do not ship or store this product near strong electromagnetic, 
electrostatic, magnetic or radioactive fields.

Do not disassemble the chassis or any module. They have no internal 
user-serviceable parts. When service or repair is needed, see 

.