Alcatel-Lucent omniaccess 6000 User Manual

C

HAPTER

 5

The Alcatel 6000-series Power Supply adapts electrical power for 
use with the Alcatel Wireless LAN Switch. The switch chassis 
has multiple slots that can hold individual power supplies to 
support load sharing and fault tolerance.

This chapter describes the general features and physical 
characteristics of the power supply. It also covers important 
power consumption management information and includes a 
Power Supply Management Worksheet. The final sections of the 
chapter cover the steps required to insert and remove power 
supplies.

Rating

There are two different power supplies available for the Alcatel 
6000-series Wireless LAN Switch

z

The standard 200 W Power Supply (OWA-6000-PS200)

This standard power supply is rated at 200 W total output and is 
auto-ranging to accept 90-135/ 170-264 VAC, at 50 to 60 Hz. Up 
to two 200 W power supplies can be installed in the Alcatel 
Wireless LAN Switch in power supply slots 1 and 3 only.

—The 200 W power supply cannot be installed in power supply 

slot 2.

z

The optional 400 W Power Supply (OWA-6000-PS400)

This optional power supply is rated at 400 W total output and is 
auto-ranging to accept 85 to 264 VAC, at 50 to 60 Hz. Up to three 
400 W power supplies can be installed in the Alcatel Wireless 
LAN Switch.