Alcatel-Lucent omniaccess User Manual
Configuring AAA Servers
89
Chapter 9
Users can move across the departments but the users belonging to
department1 will always use the RADIUS server in department1 regardless of
whether they are trying to authenticate from department1 or department2 as
long as they use the right FQDN.
department1 will always use the RADIUS server in department1 regardless of
whether they are trying to authenticate from department1 or department2 as
long as they use the right FQDN.
LDAP Server Settings
N
OTE
—As of AOS-W 2.4 and higher LDAP support has been expanded to
include Secure LDAP.
To add a new LDAP server entry:
1. Navigate to the
Configuration > AAA Servers > Security
> LDAP
page.
To configure the switch, the following information is required.
D ep a rtm e nt 2
D ep a rtm e nt 1
D ep a rtm e nt 2
D ep a rtm e nt 2
D ep a rtm e nt 1
Parameters
Description
Values
Server Name
<The name of the LDAP
server>
server>
LDAP_Server1
IP Address
<The ip address of the LDAP
server>
server>
192.168.200.1
Authentication
Port
Port
<The port on which the LDAP
server is configured. The
default value is 389.>
server is configured. The
default value is 389.>
600