Alcatel-Lucent omniaccess User Manual
Configuring Virtual Private Networks
147
Chapter 12
8
Click
Add
. The
Add Address Pool
page appears.
9
Specify the start address, the end address and the pool name.
10 Click
Done
on the completion to apply the configuration.
Enabling Src NAT
In case the users need to be nated to access the network the use this option.
The pre-requisite for using this option is to have a NAT pool which can be
created by navigating to the
The pre-requisite for using this option is to have a NAT pool which can be
created by navigating to the
Security > Advanced > NAT Pools
page.
IKE Shared Secrets
Set the value of the IKE key. The key can be configured by subnet. This can be
done by specifying the subnet and subnet mask. Care should be taken to
ensure that this key matches the key on the client.
done by specifying the subnet and subnet mask. Care should be taken to
ensure that this key matches the key on the client.
To make the key a global key:
1. Specify the address as 0.0.0.0 and netmask as 0.0.0.0.
2
Under IKE Shared Secrets click
Add
. This will open the
Add IKE Secret
page.
3
Configure the Subnet and Subnet mask. To make the IKE key global spec-
ify 0.0.0.0 and 0.0.0.0 for both the values.