Alcatel-Lucent omni 6600 User Manual
Installing and Managing Power over Ethernet (PoE)
Power over Ethernet Specifications
OmniSwitch 6600 Family Hardware Users Guide
September 2006
page 3-3
Power over Ethernet Specifications
The table below lists general specifications for Alcatel’s Power over Ethernet support. For more detailed
power supply and Power Source Equipment (PSE) specifications, refer to
power supply and Power Source Equipment (PSE) specifications, refer to
IEEE Standards supported
IEEE 802.3af DTE Power via MDI
Default PoE administrative status
Enabled
Default PoE operational status
Disabled (PoE must be activated on a switch-
by-switch basis via the
by-switch basis via the
lanpower start
com-
mand.)
OmniSwitch 6600 Family platforms supporting PoE
OmniSwitch 6600-P24
Backup power supply for the OS6600-P24
OS6600-BPS-P
Cable distances supported
100 meters (approx.)
Total number of PoE-capable ports per OmniSwitch
6600-P24
6600-P24
24
Maximum number of PoE-capable ports per stack
192
Default amount of inline power allocated for each port 15400 milliwatts
Range of inline power allowed for each port
Range of inline power allowed for each port
3000–20000 milliwatts
PoE Current draw
Approximately 4.3 Amps
PoE Power
Approximately 210 watts
Range of inline power allowed for each switch in a stack 37–210 watts