Alcatel-Lucent OmniSwitch 9000 Quick Setup Guide

38

Using WebView

This suggests either a physical or network connection issue. 
Try the following options:

Be sure that you have a good physical Ethernet cable 
connection to the Ethernet port used for managing the 
switch (EMP or NI port).

Be sure your computer has a valid Ethernet connection 
and IP address. See 

 for information on config-

uring the IP address for the EMP.

This suggests either a user name and password or Authenti-
cated Switch Access error. Try the following options:

Check that you are using the correct user name and 
password. If you have already changed the user name 
and password for your switch, be sure to use the new 
information. If you have not changed the user name 
and password, the factory defaults are admin and 
switch, respectively.

Be sure that you have “unlocked” HTTP sessions on 
the switch. To unlock HTTP sessions, enter the follow-
ing command:

-> aaa authentication http local

 for information on unlocking session types.