Alcatel-Lucent ap70 Mounting Instructions
AP70-MNT: Installation Notes
4
Part 0500056-02
May 2005
Orient the cradle with its flat side against the mounting surface. If attaching the
cradle to a wall, orient it with the notched end at the top.
cradle to a wall, orient it with the notched end at the top.
Secure the cradle to the solid surface using four #6 screws (not included) or
equivalent.
equivalent.
Suspended Ceiling Mount
1
Attach the T-rail clips to the ceiling rail.
F
IGURE
3 Attaching the T-Rail Clips
The T-rail clips twist onto the ceiling rails used with standard suspended-ceiling
systems. Use either the 15/16-inch or 9/16-inch clips, as appropriate for your
ceiling. Place the T-rail clips approximately 5.5 cm (2-1/8 inches) apart at the
location where the AP will be installed. Use the mounting cradle to gauge the
appropriate separation.
systems. Use either the 15/16-inch or 9/16-inch clips, as appropriate for your
ceiling. Place the T-rail clips approximately 5.5 cm (2-1/8 inches) apart at the
location where the AP will be installed. Use the mounting cradle to gauge the
appropriate separation.