Alcatel-Lucent omniacces-voip gateway User Manual

Page 3-55

This dialing scheme is used to connect an H.323 Gateway to an OmniPCX 4400 via an ether-
net port (LIOE; Link Optimizer Ethernet card), and requires full compliance with H.323 
Version 1 (v1); however, only H.323 v1 voice capability is currently supported by the 
OmniPCX. The OmniPCX does not support Codec Fax T.38. The OmniPCX 4400 also requires 
installation of an LIOE voice card to provide VoIP. Refer to the Alcatel OmniPCX 4400 Opera-
tions Manual for more information.

— Expects to receive eleven digits on trunk (D) and 
then uses these digits to route calls to lines (A).

— Expects to receive eleven digits in H.3233 packet on 
ethernet WAN (Z) and then uses these digits to route 
calls to lines (B).

— Routes calls starting with 1-818-878-2xxx to 
lines (A).

— Routes calls starting with 1-603-598-2xxx to 
lines (B).

— Routes calls starting with 1-603-598 to trunk (G), and 
then the VoIP network uses these digits to route calls to 
ethernet WAN (Z).

— Routes calls starting with 1-818-878 to voice daugh-
tercard #1 via ethernet WAN (Z), and then the VoIP net-
work uses these digits to route calls to trunk (D).