Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-20
Command Usage
Save current text-based configuration to flash (global “dump” save all command). The aggre-
gate configuration is first captured and then saved to a single text file that can be viewed,
edited, or reapplied to additional switches for implementation.
gate configuration is first captured and then saved to a single text file that can be viewed,
edited, or reapplied to additional switches for implementation.
Syntax Options
Remarks
The
dump
command automatically creates the text file in the flash directory of the switch. To
view the contents of the generated text file, you can use the
view file
command. For more
information, refer to the
view file
command description in the Command Line Reference Guide.
Aside from basic system parameters, (e.g., system name), the
dump
command captures only
non-default switch parameters for the specified switch features. For example, the default
settings for VoIP will not be included in a dump file.
settings for VoIP will not be included in a dump file.
The text file can be edited using a standard text editor.
Screen Output
To view all voice daughtercard parameters, type
dump voice file
followed by valid vsm boot file
name, e.g.,
dump voice file vsmboot.asc
, and then press
<Enter>
.
voice dump
dump {all |
feature-type
} [file
name
]
Definitions:
all
Specifies that information for all supported switch features (including VoIP) will be saved
to the dump file.
to the dump file.
feature-type
Specifies that only a particular feature will be saved to the dump file, (e.g.,
voice
,
vlan
).
name
Specifies a user-defined name for the resulting dump file (18 characters maximum);
(e.g.,
(e.g.,
snapshot1, vsmboot.asc
).
Default:
None
None
Command Examples:
dump all
dump voice
dump all file snapshot.1
dump voice file vsmboot.asc
dump voice
dump all file snapshot.1
dump voice file vsmboot.asc