Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-29
Command Usage
Specify DTMF digit used by voice daughtercard dialing timers to terminate dial process.
Syntax Options
Remarks
The
voice daughter card termination digit
command is used to determine when the dial process
is complete. All other digits are ignored after the termination digit. The numbering plan in use
attempts a match before the terminating digit is received. All digits dialed until the termina-
tion digit is received are considered valid, and the termination digit is discarded. Use of the
termination digit is optional.
attempts a match before the terminating digit is received. All digits dialed until the termina-
tion digit is received are considered valid, and the termination digit is discarded. Use of the
termination digit is optional.
This command effects the behavior of all phone groups on the daughtercard.
voice daughter card termination digit
voice daughter card <
slot/card_number
> [no] termination digit <
character
>
Definitions:
slot
slot
Specifies slot number of switching module installed in chassis, (e.g.,
2
).
card_number
Specifies voice daughtercard position number, (e.g.,
1
).
no
Restores the digit to the default value
#
.
value
Specifies one of 16 characters:
1, 2, 3, 4, 5, 6, 7, 8, 9, 0, #, *
or
no termination digit
(no com-
mas allowed) that can be used by dialing timers to terminate dial process, (e.g.,
#
). Dial
termination digit cannot be part of valid phone number.
♦ Syntax Note ♦
If a termination digit is used to terminate the dial process, only
one digit (or single character) can be used for the value.
Do not use
no
if entering a value.
Default:
The default character value is
The default character value is
#
.
Command Examples:
voice daughter card 2/1 no termination digit
voice daughter card 2/2 termination digit 0
voice daughter card 2/3 termination digit #
voice daughter card 2/2 termination digit 0
voice daughter card 2/3 termination digit #