Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-40
Command Usage
Set voice port line haul (short haul/long haul).
Syntax Options
Remarks
Indicates line build out of this port. Only T1/E1 ports with Line Interface Unit (LIU) equipped
can support Long Haul (LH); otherwise, only Short Haul (SH) is supported.
can support Long Haul (LH); otherwise, only Short Haul (SH) is supported.
To use this command, the voice daughtercard connection port type must be set to T1, E1 or
EI ISDN PRI, or BRI Euro via the
EI ISDN PRI, or BRI Euro via the
voice port interface type
command.
voice port line build out
voice port <
slot/port
>
line build out { short [haul] | long [haul]}
Definitions:
slot
slot
Specifies slot number of voice switching daughtercard installed in switching module,
(e.g.,
(e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
short
Specifies short haul line build out.
haul
Optional command syntax. Type either
short
or
short
haul
in the command line.
long
Specifies long haul line build out.
haul
Optional command syntax. Type either
long
or
long
haul
in the command line.
Default:
The default setting is
The default setting is
short haul
.
Command Examples:
voice port 2/1 line build out short haul
voice port 2/2 line build out long haul
voice port 2/3 line build out short
voice port 2/4 line build out long
voice port 2/2 line build out long haul
voice port 2/3 line build out short
voice port 2/4 line build out long