Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-84
Command Usage
Specify E&M Signaling time to wait before declaring off-hook (clear detect), i.e., time off-hook
before call clearing is declared.
before call clearing is declared.
Syntax Options
Remarks
In order to use this command, the
voice signaling protocol
command must be set to the corre-
sponding protocol type of E&M Wink Start, Immediate Start, or Delay Start Signaling.
voice signaling em clear detect
voice signaling channel <
slot/port/startChannel-endChannel
> em clear detect <
value
>
Definitions:
slot
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
Specifies the E-lead clear detect (delay interval) in milliseconds from 5 to 5,000, (e.g.,
50
)
before call clearing is declared. M-lead needs to be on-hook before call clearing can be
declared.
declared.
♦ Syntax Note ♦
Do not use commas when entering the E&M clear detect value
on the M-lead (for example,
on the M-lead (for example,
5,000
will return a syntax error
message).
Default:
The default value is
The default value is
400
.
Command Examples:
voice signaling channel 2/2/13-24 em clear detect 400
voice signaling channel 2/3/1-30 em clear detect 5000
voice signaling channel 2/3/1-30 em clear detect 5000