Alcatel-Lucent omniacces-voip gateway User Manual

Page 5-132

Specify Foreign Exchange Station Ground Start (FXS GS) minimum time between open loop 
and idle state.

The 

 command must be set to the corresponding protocol type before 

any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.

Definitions:
slot

Specifies chassis slot number where VSM is installed, (e.g., 

).

Specifies physical port number on voice daughtercard, (e.g., 

).

The first number in the range of voice channels (e.g., 

).

The last number in the range of voice channels (e.g., 

).

♦ Syntax Note ♦

Be sure to separate the start and end range numbers with a 

hyphen (e.g., 

).

Optional command syntax. Type either 

 or 

 in the command line.

Specifies the maximum time to wait after ring ground detection for loop to open after 
grounding tip but before returning line to idle state, in milliseconds from 0 to 65535, 
(e.g., 

).

♦ Syntax Note ♦

Do not use commas when entering the maximum fxs gs time to 
wait value for loop to open after grounding tip (for example, 

 will return a syntax error message).

Default:
The default value is 

 milliseconds.

Command Examples: