Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-156
Command Usage
Set signal strength threshold duration for single (frequency) tone detection.
Syntax Options
voice signaling single frequency tone detection threshold time
voice signaling channel <
slot/port/startChannel-endChannel
> single frequency tone detection
threshold time <
value
>
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
Specifies the signal threshold time for single frequency tone detection, in milliseconds from
0 to 65535, (e.g.,
0 to 65535, (e.g.,
50
).
♦ Syntax Note ♦
Do not use commas when entering the single frequency tone
detection threshold time (for example,
detection threshold time (for example,
20,000
will return a
syntax error message).
Default:
The default value is
The default value is
50
milliseconds.
Command Examples:
voice signaling channel 2/1/1-12 single frequency tone detection threshold time 50
voice signaling channel 2/2/13-24 single frequency tone detection threshold time 20000
voice signaling channel 2/3/1-30 single frequency tone detection threshold time 65535
voice signaling channel 2/2/13-24 single frequency tone detection threshold time 20000
voice signaling channel 2/3/1-30 single frequency tone detection threshold time 65535