Alcatel-Lucent alcatel one touch com User Manual

1 3

2. The battery status icon appears,

showing the charging status on
the smart phone's display screen.
The LED indicator becomes
amber.

If you are using a new (or very flat)
battery, the battery status icon may
take a few minutes to appear. Do not
switch on (

) your smart phone

during this period.

      Make sure you charge the battery
      continuously for at least one hour.

3. When the LED indicator changes

from amber to green, the battery
is fully charged. Disconnect the
battery charger and unplug it from
the power outlet.

Only use a battery charger approved
by manufacturer. Using any other
battery charger may damage your
smart phone and battery.

Note:
•

You can recharge your battery with
the smart phone on or off.

•

You can also use the optional acces-
sories to recharge the battery.

•

Average charging time is 1h20

1

.

The 

 icon indicates the charging status

of the battery and charge remaining in the
battery. When the battery is very low, no
bar appears, and the smart phone's
phone functions are disabled (ie, PIM-
only mode). After recharging the battery,
you must turn the smart phone off and on
again in order to re-enable the phone
functions.

You should fully discharge your battery
once a month to maintain optimum
performance.
This function is only available when the
smart phone is switched on (see page 16,
Switching your smart phone on).

1. Connect the battery charger.

2. Touch 

.

3. Touch 

 and select Discharge.

4. After the battery is fully

discharged, it will begin
recharging automatically.

Note:
•

Discharging may take a few hours,
although actual time will depend on
the battery charge level and capacity.

1 

Non contractual information