Alcatel-Lucent speedtouch 576 User Manual

Internet Access in No Time

E-DOC-CTC-20050429-0051 v1.0

Configuring the

SpeedTouch™ (and your

computer)

Once the hardware is installed successfully and you are connected to the 
SpeedTouch™, the wizard will continue with the configuration of your SpeedTouch™.
Proceed as follows:

If prompted, enter the User name and Password for your SpeedTouch™ 
security settings and click OK.

Select the appropriate Region, Provider and Service for your Internet 
connection as specified by your service provider and click Next.

Select the VPI/VCI - and, if required, the Connection Type - as specified by 
your service provider and click Next.

Enter the User Name and Password for your Internet account settings as 
specified by your service provider and click Next.

The factory default user is ‘Administrator’. Its password is blank, 
meaning you do not have to enter anything in the password field. It is 
advisable to specify another user name and password to protect your 
SpeedTouch™ from security violation during the configuration 
procedure (see 

), or as described in 

.

If the service provider has included a separate disk with a dedicated 
service profile, click Have Disk... to browse to the location of the 
appropriate service profile template file.

From here on the procedure might differ from the description below. 
The requested information will depend on the selected service profile 
and should be provided by your Service Provider. Subsequent screens 
will guide you through the configuration setup of both the 
SpeedTouch™ and your computer. Enter the requested information and 
click Next whenever requested.