Alcatel-Lucent speedtouch usb-manta usb 1.4 User Manual

Climatic conditions

Cleaning

Water and moisture

Power sources

Overloading

Servicing

AppendixB

Safety and Agency Regulatory Notices

46 / 48

3EC 36714 AAAA TCZZA Ed. 02

B.1

Safety Instructions

The Speed Touch



 equipment is intended for:

Inhouse stationary desktop use; the maximum ambient

temperature may not exceed 40ºC (104ºF).

It must not be mounted in a location exposed to direct or excessive

solar and/or heat radiation.

It must not be exposed to heat trap conditions and must not be

subjected to water or condensation.

It must be installed in a Pollution Degree 2 environment.

Unplug this product from the wall socket and PC before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

Do not use this product near water, for example, near a bathtub, wash

bowl, kitchen sink, laundry tub, in a wet basement or near a swimming

pool.

The Speed Touch



 is powered via the USB connector on your

computer, or an USB hub port.
The powering of this product must adhere to the power specifications

indicated on the marking labels.
Do not allow anything to rest on the USB cord. Do not locate this

product where the cord will be subject to persons walking on it.
Pay particular attention to the cord's plug, receptacle and cabletobody

entry point; do not use the product when these points of the cord are

damaged.

Do not overload wall (mains) outlets and extension cords as this

increases the risk of fire or electric shock.

To reduce the risk of electric shock, do not disassemble this product.

None of its internal parts are userreplaceable; therefore, there is no

reason to access the interior. Opening or removing covers may expose

you to dangerous voltages. Incorrect reassembly could cause electric

shock if the appliance is subsequently used.
If service or repair work is required, take it to a qualified service dealer.