Alpine CDA-9886R User Manual

-EN

Turn the Rotary encoder to change the setting,
and then press

/ENT.

(e.g. Select Power IC ON or Power IC OFF)

Press and hold F/SETUP for at least 2 seconds to
return to normal mode.

• Pressing

/ESC returns to the previous SETUP mode.

• If no operation is performed for 60 seconds, SETUP is cancelled.

Select Bluetooth from the setup main menu in step 2 above.
If an optional Bluetooth Box is connected, you can place a hands-free
call by a Bluetooth- equipped mobile phone.
Make this setting when the Bluetooth Box is connected and the
Bluetooth function is used. For details, refer to the Owner’s Manual of
the optional Bluetooth Box.

Setting the Bluetooth IN Connection

Set ADAPTER when the Bluetooth Box is connected.

• If the Bluetooth Box compatible with the Voice Dial function is

connected, the Voice Dial function can be used.

General is selected on the setup main menu in step 2.

Birthday Opening Message Setting (Birthday Set)

By inputting your birthday details, a message can be displayed on that
day. Turn the Rotary encoder to set “mm” (Month), and then press

/ENT. Turn the Rotary encoder again to set “dd” (Date).

Setting the Clock Display (Clock Mode)

You can select the clock display type, 12-hour or 24-hour, depending on
your preference.

Setting of Calendar Display Pattern Switching (Calendar)

You can switch the calendar display pattern to be shown when the time
is displayed.

ex. dd/mm/yyyy

25/12/2007

Playing MP3/WMA/AAC Data (Play Mode)

This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.

• Perform this setting before inserting a disc. If a disc has already been

inserted, remove it first. (If you use an MP3 changer, you have to
change discs.)

Sound (Beep) Guide Function

This function will give audible feedback with varying tones depending
upon the button pressed.

Turning Mute Mode On/Off (INT Mute)

If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.

Setting the AUX+ Setup Mode

An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.

You can change the AUX+ name display when AUX+ is set to ON.
Press

/ENT when AUX+ is set to ON, and select AUX+ name by

turning the Rotary encoder, then press

/ENT. After that, turn the

Rotary encoder to select the desired AUX+ name.

Setting the AUX+ Level (AUX IN GAIN)

After setting to ON in “Setting the AUX+ Setup Mode”, this setting can
be carried out.

Bluetooth Setting

Bluetooth IN ADAPTER / Bluetooth IN OFF (Initial Setting)

General Setting

mm/dd

AM (Before noon) 12:00 (12-hour) / 00:00 (24-hour) (Initial setting)

dd/mm/yyyy (Initial setting) / yyyy/mm/dd / mm/dd/yyyy

yyyy :

shows the year

mm :

shows the month

dd :

shows the day

CD-DA (Initial setting) / CDDA&MP3/WMA

CD-DA:

Only the CD data in Session 1 can be played
back.

CDDA&MP3/WMA: CD data, MP3/WMA/AAC files in mixed mode,

and multi-session discs can be played back.

Beep ON (Initial setting) / Beep OFF

INT Mute ON / INT Mute OFF (Initial setting)

AUX+ Setup ON / AUX+ Setup OFF (Initial Setting)

AUX+ ON : Set to ON when a portable device is connected. If

SOURCE/

is pressed and AUX+ is selected, the

sound of the portable device is input to the unit.

AUX+ OFF : Set to OFF when an iPod is connected.

Low (Initial setting ) / High

Low:

Decreases the external input audio level.

High:

Increases the external input audio level.