Alesis wildfire User Manual

Page of 48
 
A Tour of the Wildfire
 
 16 
accepts a 1/4” plug. Expression pedals may be 
purchased at your local Alesis dealer. 
 
AUX (Auxiliary) INPUT 
The AUX INPUT allows you to play along with your 
favorite songs! Just connect this RCA input to the 
output from your CD player, tape player or some other 
external audio device. The AUX INPUT level is fixed, 
but you can use the external audio device’s own volume 
control (for example, the headphone volume control on 
a portable CD player) to adjust the level of the signal 
coming into these jacks. When you turn the MASTER 
VOLUME knob, the level of this signal is affected as 
well. 
 
STEREO LINK OUTPUT 
To take full advantage of the on-board stereo effect 
processor, connect the STEREO LINK OUTPUT to 
the input of a second amplifier to create a true stereo 
setup. This jack accepts 1/4” TS cables. 
 
SPEAKER OUTPUT 
You can use the SPEAKER OUTPUT to connect the 
Wildfire to an external 8-ohm speaker with a 1/4” TS 
cable. This will disconnect the internal speaker. 
 
See chapter 9 for 
detailed instructions on 
how to set up a stereo 
link between two 
amplifiers. 
The SPEAKER 
OUTPUT is high-
voltage and can easily 
damage normal 
recording, PA, and 
other line-level input 
stages, so do not 
connect this output to a 
recording device, a PA 
system, or the input of 
another Wildfire. 
Connect it only to an 8-
ohm speaker.