Alpine cda-9830r User Manual
10
-EN
Receiving Traffic Information
1
Press T.INFO so that the “T.INFO” indicator lights
up.
up.
2
Press g or f to select your desired traffic
information station.
information station.
When a traffic information station is tuned in, the “TP”
indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast, the
unit is set in the standby mode. When a traffic information
broadcast begins, the unit automatically receives it and
the display shows “TRF-INFO” for a few seconds and
returns to the PS display.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast, the
unit is set in the standby mode. When a traffic information
broadcast begins, the unit automatically receives it and
the display shows “TRF-INFO” for a few seconds and
returns to the PS display.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
• If the traffic information broadcast signal falls below a certain
level, the unit remains in the receiving mode for 70 seconds. If the
signal remains below a certain level for over 70 seconds, the
“T.INFO” indicator blinks.
signal remains below a certain level for over 70 seconds, the
“T.INFO” indicator blinks.
• If you do not want to listen to the traffic information being
received, lightly press T.INFO to skip that traffic information
message. The T.INFO mode will remain in the ON position to
receive the next traffic information message.
message. The T.INFO mode will remain in the ON position to
receive the next traffic information message.
• If the volume level is changed while receiving traffic information,
the changed volume level will be memorized. When traffic
information is received next time, the volume level will be
automatically adjusted to the level memorized.
information is received next time, the volume level will be
automatically adjusted to the level memorized.
• In the T.INFO mode, the SEEK tuning selects only the TP stations.
PTY (Programme Type) Tuning
1
Press F so that the “FUNC” indicator lights up.
2
Press 3/PTY to activate the PTY mode, while the
unit is in Radio (FM receiving) mode.
unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently received
will be displayed for 5 seconds.
If there is no receivable PTY broadcast, “NO PTY” will be
displayed for 5 seconds.
If no RDS station can be received, the display shows “NO
PTY.”
will be displayed for 5 seconds.
If there is no receivable PTY broadcast, “NO PTY” will be
displayed for 5 seconds.
If no RDS station can be received, the display shows “NO
PTY.”
• If no operation is performed within 5 seconds after pressing PTY,
the PTY mode will be automatically cancelled.
3
Press g and f within 5 seconds after
activating the PTY mode to choose the desired
programme type while the PTY (programme type)
is being displayed.
activating the PTY mode to choose the desired
programme type while the PTY (programme type)
is being displayed.
Each press scrolls the programme type by one.
4
Press 3/PTY within 5 seconds after selecting the
programme type to start searching for a station in
the selected programme type.
programme type to start searching for a station in
the selected programme type.
The chosen programme type display blinks during
searching and lights when a station is found.
searching and lights when a station is found.
If no PTY station is found, “NO PTY” will be displayed for 5
seconds.
seconds.
5
Press F to activate the normal mode.
The “FUNC” indicator goes out.
The “FUNC” indicator goes out.
• Operate the unit while the “FUNC” indicator lights up. If no
operation is performed within 5 seconds, the “FUNC” indicator
goes out.
goes out.
Receiving Traffic Information While Playing
CD or Radio
CD or Radio
1
Press T.INFO so that the “T.INFO” indicator lights
up.
up.
2
Press g and f to select a traffic information
station if necessary.
station if necessary.
When a traffic information broadcast starts, the unit
automatically mutes the CD player/changer or the regular
FM broadcast.
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
automatically mutes the CD player/changer or the regular
FM broadcast.
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for over 70
seconds, the “T.INFO” indicator blinks.
When the TP signal can no longer be received for over 70
seconds, the “T.INFO” indicator blinks.
In the CD mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
• The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional alternate
frequencies to the AF list. The “EON” indicator lights up while an
RDS EON station is being received. If the station being received
does not broadcast the traffic information, the receiver
automatically tunes in the related station that broadcasts the traffic
information when it occurs.
frequencies to the AF list. The “EON” indicator lights up while an
RDS EON station is being received. If the station being received
does not broadcast the traffic information, the receiver
automatically tunes in the related station that broadcasts the traffic
information when it occurs.
3
Press T.INFO to deactivate the Traffic Information
mode.
mode.
The “T.INFO” indicator goes out.
LIGHT M
↔ CLASSICS ↔ OTHER M