Alpine cda-9883r User Manual

01GB05CDA-9883R.fm

ALPINE CDA-9883R 68-08564Z11-A (EN)

• No CD is inserted.

- Insert a CD.

• Although a disc is inserted, “No Disc” is displayed and the unit 

does not start to play or eject the disc.
- Remove the disc by following these steps:

Press the 

 button again for at least 2 seconds.

If the disc still does not eject, consult your Alpine dealer.

• Mechanism error.

1) Press the 

 button and eject the CD.

If not ejecting, consult your Alpine dealer.

2) When the error indication remains after ejecting, press the 

 

button again.
If the error indication still does not turn off after pressing the 

 button for a few times, consult your Alpine dealer.

• When “Error” is displayed:

• A copy-protected WMA file was played back.

- You can only play back non-copy-protected files. 

• A sampling rate/bit rate not supported by the unit is used.

- Use a sampling rate/bit rate that is supported by the unit.

• Protective circuit is activated due to high temperature.

- The indication will disappear when the temperature returns to 

normal operating range.

• Malfunction in the CD Changer.

- Consult your Alpine dealer. Press the magazine eject button 

and pull out the magazine. 
Check the indication. Insert the magazine again. 
If the magazine cannot be pulled out, consult your Alpine 
dealer.

• Magazine ejection not possible.

- Press the magazine eject button. If the magazine does not eject, 

consult your Alpine dealer.

• A disc is left inside the CD Changer.

- Press the eject button to activate the eject function. When the 

CD Changer finishes the eject function, insert an empty CD 
magazine into the CD Changer to receive the disc left inside 
the CD Changer.

• No magazine is loaded into the CD Changer.

- Insert a magazine.

• No indicated disc.

- Choose another disc.

• The iPod is not connected.

- Make sure the iPod is correctly connected (refer to 

“Connections”).
Make sure the cable is not bent excessively.

• The iPod’s battery remains low.

- Refer to the iPod’s documentation and charge the battery. 

• There are no songs in the iPod.

- Download songs to the iPod and connect to the adapter.

• There is no podcast data in the iPod.

- Download podcast data to the iPod and connect to this unit.

• Communication error.

- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and the 

adapter, using the iPod cable.

• Caused by the iPod Software Version not being compatible with 

this unit.
- Update the iPod Software Version to be compatible with this 

unit.

01GB00CDA-9883R.book  Page 28  Friday, November 17, 2006  8:25 PM