Alpine CDE-9845RB User Manual

-EN

Installation

Slide mounting sleeve from main unit (see
“Removal” on this page). Slide the mounting sleeve
into the dashboard and fix it with the metal
shackles.

When your vehicle has the Bracket, mount the long
hex bolt onto the rear panel of the CDE-9845RX/
CDE-9843RX/CDE-9841R and put the Rubber Cap
on the hex bolt. If your vehicle does not have the
Mounting Support, reinforce the head unit with the
metal mounting strap (not supplied). Connect all
the leads of the CDE-9845RX/CDE-9843RX/CDE-
9841R according to details described in the
CONNECTION section.

• For the screw *, provide a proper screw to the chassis installing

location.

Slide the CDE-9845RX/CDE-9843RX/CDE-9841R
into the dashboard until it clicks. This ensures that
the unit is properly locked and will not accidentally
come out from the dashboard. Install the
Detachable Front Panel.

Removal

1 Remove the detachable front panel.

2 Insert the optional brackets into the back, along the

guides on either side of the unit. The unit can now be
removed from the mounting sleeve.

3 Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Dashboard

Rubber Cap
(Included)

Bracket

Mounting sleeve
(Included)

Hex Bolt
(Included)

this unit

∗

Metal Mounting Strap

Screw

Bolt Stud

Hex Nut (M5)

this unit

Front frame

Screws (M5

× 8)

(Included)

Mounting Bracket

this unit

No Pressure Here

this unit

Bracket
(Included)