Alpine dva-9965r User Manual

-EN

ALPINE DVA-9965R 68-02065Z31-A (EN)

1 ISO Antenna Plug
2 ISO Antenna Converter Plug (sold separately)
3 Antenna Receptacle
4 Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna,
if applicable.

• This lead should be used only for controlling the vehicle's power

antenna. Do not use this lead to turn on an amplifier, or a signal
processor, etc.

5 Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your
amplifier or signal processor.

6 Audio Interrupt In Lead (Pink)
7 Illumination Lead (Orange)

This lead may be connected to the vehicle's instrument
cluster illumination lead. This will allow the backlighting of
the unit to dim whenever the vehicle's lights are turned on.

8 Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.

9 Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle's
battery.

! Fuse Holder (7.5A)
" Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.

# Monitor Control Lead (Front) (White/Pink)

Connect this to the Monitor Control Lead of the touch panel
compatible front monitor.

$ Monitor Control Lead (Rear) (White/Pink)

Connect this to the Monitor Control Lead of the touch panel
compatible rear monitor.

% Remote Control Input Lead (Touch panel compatible

front monitor) (White/Brown)
Connect this to the remote control output lead for the touch
panel compatible front monitor.

& Remote Control Intput Lead (Rear) (White/Brown)

Connect this to the remote control output lead for the rear
monitor.

• If the optional remote control eye (KRE-500E) is connected, the

remote control signal cannot be received.

( Vehicle Display Interface Connector

Vehicle Display Interface control signals.
Connect this to the optional vehicle Display Interface box.

• For details about connections, consult your nearest ALPINE dealer.

) Video Output Connector (Yellow)

Output the video.

~ Audio Output Connectors

RED is right and WHITE is left output the audio.

+ Front Output RCA Connectors

RED is right and WHITE is left.

, Rear Output RCA Connectors

RED is right and WHITE is left.

- Subwoofer RCA Connectors

RED is right and WHITE is left.

. S Video output terminal

Outputs the video signal.
Connect a monitor that has a S video input terminal.

/ Digital Output Terminal (Optical)

Use when combining fiber digital input compatible products.

: Remote Control Eye Jack

If a monitor other than Alpine is installed, it can still be
controlled by the supplied remote control by installing the
optional remote control eye (KRE-500E).

; Steering Remote Control Interface Connector

To steering remote control interface box.

< Power Supply Connector
= Setting the 3WAY/2WAY switch

Set the 3way/2way switch according to your audio system.

> RCA Extension Cable (sold separately)
? Ai-NET Connector

Connect this to the output or input connector of other
product (CD changer, Equalizer, iPod adapter*,

etc.)

equipped with Ai-NET.

* When connecting iPod, the adapter KCA-420i is required. For

details about connections, refer to the manual of KCA-420i.

@ Ai-NET Cable (Included with CD Changer)
[ Power Supply Box

• Do not install the Power Supply Box at a location subjected to

water such as under the floor mat or air conditioner. This may
cause a malfunction.

• Do not bundle the Power Supply Box cable with other audio

cables. Doing so may induce noise into your system.

• Keep the Power Supply Box converter away from the Antenna

cables and the rear side of the unit, otherwise noise may be
generated when receiving radio broadcast.