Alpine ivx-m706r User Manual

Press the SOURCE button.
The main menu appears on the display.

Press the 

4

 (A.PROC) button.

The Audio Processor List appears.

Rotate the rotary encoder and select the "Time-
Corr." (Time-Correction), then press the rotary
encoder.
The display changes to the Time-Correction
mode screen.

Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The display changes to the Time-Correction
Adjustment mode screen.

Press the rotary encoder repeatedly to select the
position (seat) you wish to adjust.
Each press changes the seat positions as
follows:

  →

→ 

→

→

Rotate the rotary encoder clockwise or
counterclockwise to increase or decrease the
Time-Correction value respectively to your
desired value.

When adjustment has been completed, press the
FUNC (RETURN) button. The display returns to
the Time-Correction mode screen.

If an optional Alpine Channel Divider PRA-H400
is connected, you can control the Divider from the
IVX-C806/IVX-M706/CVA-1006R.
Use this procedure when one or two 2-way-
system or 3-way system channel dividers are
connected.

Press the SOURCE button.
The main menu screen appears on the display.

Press the 

4

 (A.PROC) button.

The display shows the Audio Processor list
screen.

Rotate the rotary encoder and select the
"Divider" (when one divider is connected) or
"Divider-F and Divider-R" (when two dividers are
connected), then press the rotary encoder to
execute the selection.
The display changes to the Divider mode screen.

Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The mode changes to the Divider Adjustment
mode.

Press the 

1

 (X-OVER) button. The mode

changes to the Cross-Over Adjustment mode.

(IVX-C806)

1

1

6

6

4

4

2

2

(IVX-M706 .... with MD built-in
 CVA-1006R ... without MD built-in)