Alpine nvd-z001 User Manual
35
EN
7
3
Dual-screen display
Notes:
• To change the map orientation, select “Map
• To change the map orientation, select “Map
orient.” menu by tilting the joystick and
press ENTER. Each pressing of ENTER
toggles between north-up and heading-up
modes.
press ENTER. Each pressing of ENTER
toggles between north-up and heading-up
modes.
• To display the set local POI icons, select
“Show POI icons” by tilting the joystick and
press ENTER. If a local POI icon(s) is not
displayed, this menu cannot be selected. To
display a local POI icon(s), refer to page 26.
press ENTER. If a local POI icon(s) is not
displayed, this menu cannot be selected. To
display a local POI icon(s), refer to page 26.
• To display the set RDS-TMC icons, select
“Show RDS-TMC info.” by tilting the joystick
and press ENTER. When “Show RDS-TMC
info.” in Setting the RDS-TMC (see page 43)
is set to OFF, this menu cannot be selected.
and press ENTER. When “Show RDS-TMC
info.” in Setting the RDS-TMC (see page 43)
is set to OFF, this menu cannot be selected.
• To change the map magnification range,
press the
4 or 3 button.
Touch: In the case of touch operation, touch
“
“
(zoom in)” or “
(zoom out)”.
• If a map that is bigger than 800m scale is
being displayed, the POI icons cannot be
displayed. In this case, change to a detailed
map by pressing the
displayed. In this case, change to a detailed
map by pressing the
3 button.
When the settings have been
completed, select “OK” by tilting the
joystick and press ENTER to return
to the current vehicle position map.
Now, the system displays two
different screens.
completed, select “OK” by tilting the
joystick and press ENTER to return
to the current vehicle position map.
Now, the system displays two
different screens.
The Edit right screen menu appears.
1
2
4
5
6
The system can display two different screens
simultaneously for your convenience. For
example, a detailed map and a wide range map
can be displayed at the same time so that you can
view a detailed map around the present vehicle
position and a wide range map along the route.
simultaneously for your convenience. For
example, a detailed map and a wide range map
can be displayed at the same time so that you can
view a detailed map around the present vehicle
position and a wide range map along the route.
While a map screen is being
displayed, press ENTER.
displayed, press ENTER.
Touch:
In the case of touch operation, touch “
In the case of touch operation, touch “
. ”
The point setting menu appears.
Select “Screen configuration (
Select “Screen configuration (
)”
by tilting the joystick and press
ENTER.
ENTER.
The Screen configuration selection
menu appears (see page 34). Select
“
menu appears (see page 34). Select
“
” by tilting the joystick and
press ENTER.
Note:
The screen configuration selection menu is
displayed also by pressing the
The screen configuration selection menu is
displayed also by pressing the
button on
the remote control.
The System changes to dual-screen
mode and displays two screens
simultaneously.
mode and displays two screens
simultaneously.
To change display mode of the right
screen, press RIGHT MAP button.
screen, press RIGHT MAP button.
Touch:
In the case of touch operation, touch the right
screen.
In the case of touch operation, touch the right
screen.