Alpine sec-8028 User Manual
English
38
1. Place the remote control transmitter on a
flat surface with the buttons facing down.
Remove the battery case screws using a
#1 sized Phillips screwdriver.
Remove the battery case screws using a
#1 sized Phillips screwdriver.
2. While holding the remote control with the
buttons facing down, gently remove the
bottom cover.
bottom cover.
3. Remove the old battery and insert a new
12V alkaline battery. Make sure the
battery polarity is correct.
battery polarity is correct.
4. Replace the bottom cover.
5. Tighten the screws. Be careful not to
5. Tighten the screws. Be careful not to
overtighten.
Remote Control
Battery Replacement
Battery Replacement