Alpine tme-m860 User Manual
4
-EN
01GB05TMEM860.fm
ALPINE TME-M860 68-04123Z81-B (EN)
Location of Controls
SOURCE button
Each time you press the SOURCE button, SOURCE is
switched.
switched.
POWER Indicator
POWER button
Turns the power on and off.
DIMMER Sensor
Senses the brightness of the car interior
Remote Sensor
Point the optional remote control transmitter toward the
remote sensor within a range of 2 m.
remote sensor within a range of 2 m.
Volume button
Adjust the volume level by pressing the
or
button.
Monitor
About the Touch Button Operation
The display unit is equipped with tactile feedback (PULSE TOUCH).
• Be sure to touch the button lightly with the pad of your finger on the
display to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
Turning Power On or Off
1
Press POWER to turn on the unit.
2
Press POWER to turn off the unit.
• Some operation of the unit cannot be performed while the vehicle is
in motion. In this case, be sure to first stop your vehicle and apply the
parking brake, then perform the operation.
parking brake, then perform the operation.
• In low ambient temperature conditions, the display may be dark for a
short period of time immediately after the power is turned on. Once
the LCD has warmed up, the display returns to normal.
the LCD has warmed up, the display returns to normal.
• For your safety, some operation of the unit cannot be performed
while the vehicle is in motion. In this case, first stop the vehicle and
engage the parking brake, then perform the operation.
engage the parking brake, then perform the operation.
• If the voltage of the vehicle's battery power is low, the screen may
blink. This is normal and not a malfunction.
Adjusting the Volume
Adjust the volume level by pressing
or
.
Volume: 0 - 30
Getting Started
About the expression of buttons in this Owner’s
Manual
Manual
• The buttons on this unit are expressed in bold (e.g. POWER). The
touch buttons on the display are expressed in bold with [ ] (e.g.
[SOURCE]).
[SOURCE]).
• This Owner’s Manual explains mainly the function of touch
buttons, when a touch button and a hardkey have the same
function.
function.
What is the tactile feedback (PULSE TOUCH) ?
When you touch a button graphic in the display, you will feel a
mild vibration and click on the display panel surface. This
feedback enables you to easily identify action areas in the
display.
When you touch a button graphic in the display, you will feel a
mild vibration and click on the display panel surface. This
feedback enables you to easily identify action areas in the
display.
01GB00TMEM860.book Page 4 Wednesday, February 22, 2006 11:30 AM