AMX rdd-dm6 6-channel integrated dimmer module User Manual
AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
043-019-2195 2/04 ©2004 AMX Corporation. All rights reserved.
The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.
3000 research drive, richardson, TX 75082 USA • 469.624.8000 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993
Connecting Dry Closures:
Use the 8 (+ common) dry closures with a WPD8 eight-button wall panel.
Setting AXlink and PROlink Address Numbers:
Lighting Application Drawings
FIG. 5
Dry closures connection
1
2
3
4
5
6
7
8 COM
Each contact (1 - 8) is pre-
programmed with a default preset.
programmed with a default preset.
Refer to the AMX Lighting Control
System instruction manual for
details on dry closure default presets
and recording new presets.
System instruction manual for
details on dry closure default presets
and recording new presets.
FIG. 6
Setting AXlink and PROlink address numbers
AXlink Address
PROlink Address
Test
Set the AXlink address number
(1-255) for the RDD-DM6. This
number must match the device
number in your Axcess program.
(1-255) for the RDD-DM6. This
number must match the device
number in your Axcess program.
Use the PROlink DIP switch to set
the PROlink address number for the
RDD-DM6 (1-10).
the PROlink address number for the
RDD-DM6 (1-10).
Pin 8 on the PROlink DIP switch is
a test switch that turns all circuits on
to full.
a test switch that turns all circuits on
to full.
FIG. 7
Method A
FIG. 8
Method B
Method A
120 VAC 1Ø /
Single-phase, six load
Method B
120/208-240 VAC 1Ø /
Single-phase, six load