Aopen aoi-908 User Manual

 

 

being eavesdropping by unauthorized wireless users. We allow up to four 40-bit encryption keys 
(WEP40) and two 128-bit encryption keys (WEP128) to be configured (using either the ASCII or 
Hexadecimal format). Please select the one you want to be used when communicating with the 
Wireless Router.

 

WEP Key Setting: The length of a WEP40 key must be equal to 5 that of a WEP128 key 13. Once 
you enable the WEP function, please make sure that the same WEP key is used on both the Wireless 
Router as well as the wireless client stations. 

 
 

After stepping through the Wizard’s pages, you can go back to correct any modifications or you can 
click “FINISH” at this page to end the Setup Wizard. Your modifications take effect when you click on 
the “FINISH” button. This will also save your new settings. Congratulations! You are now ready to use 
the Wireless Router. 

 

 
Note: If you change the router’s private address (e.g., from the default of 192.168.1.1 to 192.168.3.1), 
once you click on “FINISH” you will no longer be able to communicate with your Wireless Router. 
You need to re-boot your computer to re-acquire a new IP address and the default Gateway from the 
Wireless Router based on the new private IP network address.