Aopen pa70 User Manual

Hardware Installation

Prior to working on your computer, make sure the power and any
related equipment is turned off.

u For The First Time Installation

1.

 Locate AGP bus expansion slot. Make sure the slot is unobstructed.

2.

 Remove the corresponding expansion slot cover from the computer

chassis.

3.

 Position the card directly over the AGP slot and insert one end

of the card down into the slot. Be sure the metal contacts on the
bottom of the host adapter are securely seated in the slot.

4.

 Connect your analog monitor’s 15-pin VGA connector to the card

and fasten the retaining screws(if any).

5.

 Connect other cables and devices if available.

6.

 Now you are ready to install the software drivers and utilities.

u For Systems with Existing VGA Card

1.

 Change your display driver to Standard VGA.

2.

 Shut down your computer and unplug all electrical cords.

3.

 Replace the existing VGA card with the PA70 graphics card.

4.

 Restart your computer and install the PA70 display driver.