Aopen fm56-sv User Manual

2

1. Turn off the computer. No power must be applied to your computer when 

you install the internal modem, or the computer could be damaged.

2. Make sure you can freely access the back of the personal computer. 

Remove the computer cover.

3. Select any available PCI slot into which you can 

install the internal modem.

4. Unscrew and remove the slot cover.

5. Hold the internal modem above the slot you have 

selected, and carefully slide the modem into the 

slot, applying even pressure to both ends of the 

modem. Stop inserting the modem when its 

gold-plated edge connector is aligned and fully 

seated into the base of the computer.

6. Use the screw that was holding the slot cover to 

secure the modem in the slot.

7. Use the cover-mounting screws to secure the computer cover. This 

completes the hardware installation of your modem.

8. Locate an available RJ-11 modular jack telephone outlet.

9. Take one end of the modular cord supplied with the modem and plug it into 

the LINE modular jack on the back of modem.

10. Plug the other end of the modular cord into the modular jack on the wall 

outlet.

11. Connect the telephone's modular cord into the PHONE jack on the back of 

your modem. (An active telephone line and telephone set are needed if you 

need to use a telephone with your modem.)

12. Lift your telephone's handset and listen for a dial tone.