ASUS dvd-e616p1 User Manual
ASUS DVD-E616P1 User Manual
15
Connecting the Drive Cables
1. Connect the power cable plug to the power connector on the rear panel.
2. Connect the 40-pin IDE cable plug to the IDE connector, matching the
red pin stripe on the cable with Pin 1 on the connector.
3. If your computer has a sound card or an onboard audio feature, connect
an audio interface cable to the 4-pin analog audio connector on the rear
of the drive. Connect the other end of the audio cable to the connector
on the sound card or on the 4-pin CD connector on the motherboard.
of the drive. Connect the other end of the audio cable to the connector
on the sound card or on the 4-pin CD connector on the motherboard.
All the cable plugs are slotted so that they fit in only one orientation. If
a plug does not fit in completely, try reversing it. DO NOT apply too
much force when fitting the cable plugs.
a plug does not fit in completely, try reversing it. DO NOT apply too
much force when fitting the cable plugs.
Replace the computer cover according to your computer manual.
Power Cable
4-pin Audio Cable
IDE Cable