ASUS mypal a600 User Manual
Avolites Pearl 2000 Operators Manual - page
120
P2000MAN.DOC 19/10/99 17:59
The disk is Formatted and Verified as above, then the Show is automatically Saved.
14.1.2 Saving your show to disk
When the Save Show function is used all data for a show is saved including
the Patch.
the Patch.
•
Place the Show Disk into the disk drive.
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
•
Press the blue DISK button on the Program Select bank
. Its LED lights up.
Puts you in the DISK OPTIONS menu.
•
Press Softbutton B [SAVE SHOW TO DISK].
•
If required, you can enter a show name onto the disk using the Preset
ADD and SWOP buttons. The VGA Screen shows you how to do this.
•
Press ENTER.
Two files are now saved onto the disk, these are AVO.SYS and MEMPOOL.SYS.
The first of these contains the various set-up parameters required for the desk. This
file does not change length. The second file contains the data for your show. As you
program more memories, Chases etc. this file becomes larger.
The first of these contains the various set-up parameters required for the desk. This
file does not change length. The second file contains the data for your show. As you
program more memories, Chases etc. this file becomes larger.
•
When the Save is successfully completed, this message is displayed :
All files successfully saved. Press EXIT.
•
Press EXIT
⇒
If you do not get this message, you may have a damaged disk. Try
Saving to another disk.
Whenever you Save the show everything is saved. There is no need to save
or load the Patch separately. The time and date of the Save is recorded onto
the disk.
or load the Patch separately. The time and date of the Save is recorded onto
the disk.
14.1.3 Loading a show from disk
•
Place the Show Disk into the disk drive.
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
•
Press the blue DISK button on the Program Select bank
. Its LED lights up.
Puts you in the DISK OPTIONS menu.
•
Press Softbutton A [LOAD SHOW FROM DISK].
The disk is read, and the
VDU displays the show name if present.
•
Press ENTER to confirm that you want to Load a show or EXIT to
abandon.
The desk now starts reading the show files
.
•
When the files have been read you are prompted to press EXIT to restart
the desk.
If you are not given this message the load has not been successful.
If you are not given this message the load has not been successful.
14.1.4 Setting the internal clock
The time and date of a Save are recorded onto all disks. The internal clock is
used as the source of this information. The current settings are displayed in
the upper right hand corner of the VGA Screen.
used as the source of this information. The current settings are displayed in
the upper right hand corner of the VGA Screen.
You can change the internal clock like this :