ASUS mypal a600 User Manual
Avolites Pearl 2000 Operators Manual - page
128
P2000MAN.DOC 19/10/99 17:59
The Attribute Select buttons are pre-programmed and defined in the
Personality File. They are used to control the Attributes of a Fixture.
The Group Select buttons select the same Groups that can be accessed
from the desk, and can be programmed from the desk or the Graphics
Tablet.
The Focus Select buttons are the same as the Preset Focus buttons on the
desk, and can be programmed or recalled from either the desk or the
Graphics Tablet.
The Fixture Select buttons select the same Fixtures as the SWOP buttons
on the desk. Fixture Select button 1 selects the Fixture on Handle 1, etc.
These are set when the Fixture is patched.
Personality File. They are used to control the Attributes of a Fixture.
The Group Select buttons select the same Groups that can be accessed
from the desk, and can be programmed from the desk or the Graphics
Tablet.
The Focus Select buttons are the same as the Preset Focus buttons on the
desk, and can be programmed or recalled from either the desk or the
Graphics Tablet.
The Fixture Select buttons select the same Fixtures as the SWOP buttons
on the desk. Fixture Select button 1 selects the Fixture on Handle 1, etc.
These are set when the Fixture is patched.
It may be useful to mark up the paper insert with what is on each button.
Additional inserts can be ordered from Avolites (Part number 11-03-0076.
Got that?!).
Additional inserts can be ordered from Avolites (Part number 11-03-0076.
Got that?!).
15.2.4 The Fader
This allows absolute setting of any Attribute, and has Instant Access to the
Dimmer channel on any Fixture.
Dimmer channel on any Fixture.
15.2.5 The Function button
A selection of buttons for controlling the Programmer, LED mimic modes and
other miscellaneous operations. Some buttons are not yet defined and these
will be used for future options.
other miscellaneous operations. Some buttons are not yet defined and these
will be used for future options.
15.2.6 The Mouse pad and Screen selects
These are for future enhancements.
15.3 Connecting up the Tablet
•
Turn the desk off.
•
Connect the Graphics Tablet with the cable provided to the serial port on
the desk and the back of the Tablet.
⇒
Only use the cable and Tablet supplied by Avolites in order to prevent
damage to either the Tablet or the desk. The Tablet is specially modified
to work with Avolites desks.
to work with Avolites desks.
•
Turn the Tablet on by pressing the blue button on the top left back edge
of it. The Tablet will not power up until the desk is turned on.
The blue
button should be in a depressed position
.
•
Turn the desk on
. An LED on top left corner of the Tablet lights up when it is on.
It is best to leave the Tablet on when you turn off the desk so it will be correctly
configured when the desk is turned on next time.
configured when the desk is turned on next time.
The Tablet may work immediately. If not :
•
Turn the key to Program and press Softbutton B [USER OPTIONS].
•
Use the Down Cursor to reach option 10 and then the Right Cursor
button to select G-TABLET. If it is already selected, cycle round until it
comes back again.
comes back again.
•
Press EXIT to leave the user options menu.