ASUS mypal a600 User Manual

Avolites Pearl 2000 Operators Manual - page

 143

   P2000MAN.DOC  19/10/99 17:59

•

 Select a Script File for checking as above. See Section 17.2 Selecting a

Script File for Editing or Playback.

•

 Entering a step number will output that step. 

.

•

 Either :

Enter another Step number for a Step to execute,
Or :
Press Softbutton E [CONNECT TIMER] to run the subsequent steps to
Timecode.

The editable aspects of each step in the Script File are :

The Playback Channel
The Timecode value
The time taken to fade the Playback Fader in or out.

These are edited using the Assign Action and Assign Timecode menus. The
arrow points to the Step currently loaded for Editing. You can move the
arrow through the Steps using the Up and Down Cursor Keys.

There is a code by each step.

The first letter is ‘C’, ‘M’ or ‘R’ denoting a Chase or Memory on the Playback
Fader being activated, or the ‘R’ denoting Ramp Down, which is a Playback
Fader going down to zero (ie. off).

A Chase or Memory has next a number indicating the Roller Page (1, 2 or 3).
The next letter is the Roller Facet (A to J) and the final number is the Handle
number (1 to 15).

Ramp Down only has the Handle number.

•

 From the Script File menu press Softbutton D [EDIT A SCRIPT FILE].

.

•

 Use the Up and Down Cursor Keys to point the arrow at the step you

want to edit.

•

 Press Softbutton D [ASSIGN ACTION].